Aug 2018 – Oct 2018 · 2 mos · Qatar

•  Attended to customer complaint and perform coverage survey.
•  Identifying field problems such as dropped calls, blocked calls, missing neighbor and give
• solutions to this problem.
•  Do live optimization with senior engineer from field.
•  Indoor optimization 2G, 3G and LTE.
•  Performed IBS survey and quality test using TEMS.
•  Did coverage verification and swap checking for new rollout and shifted sites.
•  Suggest and implement Network Parameters changes for reducing call drops and better coverage
• and analysis of impact after changing of parameter.
•  New Site verification & Optimization of the network, Coverage for the integrated indoor sites
• with the help of TEMS Investigation (Walk test).
•  Conduct RF Technical Site Surveys (TSS) for the In-Building design/DAS.
•  Once RF equipment is installed, perform RF data collection to ensure that the quality of service
• meets RF design specifications such as RxLev, RxQual, Handover, parameter verification.
•  Verify macro, micro and In-building coverage plans to meet quality specifications.
•  Site Auditing for the indoor sites to verify site database and cell design criteria’s.
•  Checking coverage for Indoor solution to check the sufficient Rx strength & Rx quality.
•  Hands on experience of TEMS Investigation & MapInfo Professional.
•  Perform indoor survey prior to repeater installation and coverage verification after installation as per As built report.

Oct 2017 – Apr 2018 · 6 mos · Kerala

• Project: Vodafone, Bharti Airtel
• Client: HUAWEI & NOIKA
• Profile: RF Engineer
• Roles and Responsibilities were:
• GSM
• Performed Drive Test for new and already on-air 2G Airtel sites using TEMS 17.1V.
• Performing pre drive check swap and analysis Rx level, Rx quality &RF parameters, check
• Handover failure, throughput issue, dropped and mute call, and solve issues.
• Optimization and Performance enhancement of GSM network, coverage optimization by
• changing Antenna Power, mechanical and electrical Tilt and Azimuth.
• Perform SCFT (single cell functionality test) on site, check static test for call, Sms, data, CSFB,
• and check mobility on call and data during dynamic.
• Save logs and snaps during all tests and forward to project team for report making.
• LTE
• Performed SCFT for new 4G Vodafone sites using Genex probe V3R15.
• Did pre drive for checking DL/UL Throughput, RSRP, RSRQ, SINR, CSFB and FRLTE.
• Optimize the site as per pre drive status and change tilt of the antenna and orientation with the
• help of rigger.
• Performed the static test as per HUAWEI requirement for downlink and up link speed, ATDT
• script running, Ping test etc.
• Check DL/UL speed during mobility on same route.
• Performed LTE Throughput test on Uplink and Downlink using both FTP and HTTP servers.
• Meet the customer complaint and make satisfy the customer with HUAWEI support.
• Involved in TWIN BEAM project in NOIKA for Airtel LTE, 2G&3G.

Nov 2016 – Oct 2017 · 11 mos · Kerala

• Project: Vodafone (HUAWEI)
• Client: Metro Telworks Pvt. Ltd
• Profile: RF Engineer
• Roles and Responsibilities were:
• Take EMF survey for new Vodafone site using NEP tool and submit the details to Huawei.
• Performed SCFT and CLUSTER drive for LTE/3G/2G new Vodafone sites and SCANNER drive
• for LTE/3G clusters.
• Did physical optimization for the site using ISDP tool with rigger.
• Performed 2G CUTOVER from NOIKA to HUAWEI and check huawei cell id came or not.
• Worked closely with engineers and made suggestion such as missing neighbors and down tilts
• based on the terrain and data collected during routes.

Aug 2016 – Nov 2016 · 3 mos · India

• Project: JIO 4G
• Client: Wipro
• Profile: Telecom Engineer
• Roles and Responsibilities were:
• Perform SCFT for JIO 4G using XCAL tool.
• Monitor the RF parameters like RSRP, RSRQ, SINR, CQI and others.
• Ensure all cells are transmitting properly, upload collected logs.