Yugal Gupta

Product Engineer

Bengaluru, Karnataka, India8 yrs 11 mos experience

Most Likely To SwitchHighly Stable

Key Highlights

Over 5.5 years of experience in power electronics.
Contributed to multiple IEEE publications.
Expertise in energy conversion and management solutions.

Stackforce AI infers this person is a Power Electronics Engineer with a focus on energy systems and management.

Contact

Skills

Core Skills

Power ManagementPower Engineering

Other Skills

Cadence SoftwareAnalog CircuitsPower Supply DesignVoltage RegulatorsHardware EngineeringPower AnalysisApplication-Specific Integrated Circuits (ASIC)Electronic EngineeringSchematic CapturePower ControlAC/DCLTSpicePSpicePrinted Circuit Board (PCB) DesignMATLAB

About

I have a MS in Electrical and Electronics Engineering from CPES, Virginia Tech, with a focus on power electronics and energy systems. With over 5.5 years of work experience in the field of power electronics, I have developed strong competencies in modeling, simulation, analysis, and control of power converters, transformers, and microgrids. I have also contributed to multiple publications in IEEE journals and conferences, showcasing my research and innovation skills. My passion is to find reliable and efficient solutions for the challenges of energy conversion and management, and to make a positive impact on the environment and society.

Experience

8 yrs 11 mos

Total Experience

1 yr 6 mos

Average Tenure

1 yr 10 mos

Current Experience

Apple

Power & Sensing Integration Engineer

Jun 2024 – Present · 1 yr 10 mos · Bengaluru, Karnataka, India · Hybrid

Infineon technologies

Staff Engineer

Jul 2022 – Jun 2024 · 1 yr 11 mos · El Segundo, California, United States

Power ManagementCadence SoftwareAnalog CircuitsPower Supply DesignVoltage RegulatorsPower Engineering+6

Cpes, virginia tech

Graduate Research Assistant

Aug 2019 – Aug 2022 · 3 yrs · Blacksburg, Virginia, United States

Power ManagementAC/DCPower Supply DesignVoltage RegulatorsPower EngineeringHardware Engineering+3

Iit kanpur

2 roles

Research Fellow

Sep 2018 – Jul 2019 · 10 mos · Kanpur Area, India

Minimization of inrush current of a 3-phase transformer operated through a gang circuit breaker
Proposed a flux error based controlled switching method to minimize inrush current of a 3-phase transformer.
Validated the proposed technique on a 3-phase 1000 kVA, 11kV/430V Delta-Star transformer
Have a look at this publication for more details:
https://ieeexplore.ieee.org/document/9095381
Reliability improvement of power converters using temperature droop-based reactive power sharing
Proposed a reactive power sharing technique for parallel converters to minimize the effect of thermal stress.
Verified the proposed technique for an islanded microgrid using MATLAB & Simulink.
Have a look at this publication for more details:
https://ieeexplore.ieee.org/abstract/document/9632415

Power ManagementAC/DCAnalog CircuitsPower Supply DesignVoltage RegulatorsPower Engineering+4

Student Research Associate

May 2017 – Jul 2017 · 2 mos · Kanpur Area, India

Aim: Online Condition Monitoring of a DC Link Capacitor Bank for Grid Feeding Solar PV Inverter with Reduced Sensor Requirements
Proposed a Physics of Failure based novel technique and to online assess the health of a Capacitor bank.
The proposed scheme was experimentally validated on laboratory prototype of single phase grid connected PV inverter having 2X2 capacitor bank in dc link with no additional sensor requirements.
Have a look at this publication for more details:
https://ieeexplore.ieee.org/document/8536870

Power ManagementAC/DCAnalog CircuitsPower Supply DesignVoltage RegulatorsPower Engineering+4

Power electronics lab, electrical engineering department, iit bombay

Sophomore Summer Research Internee, IIT Bombay

May 2016 – Jul 2016 · 2 mos · Mumbai Area, India

As a sophomore internee, I worked under the tutelage of Prof. B.G. Fernandes, Electrical Engineering Department, IIT Bombay.
I designed Cost - Optimized voltage regulated switched mode power supply in which one was based on Buck Topology and another was based on Flyback Topology. I Simulated the internal circuitry of Buck based IC using PSIM software. Then fabricated both designs on PCBs using Diptrace software and analysed the results.

Power ManagementPower Supply DesignVoltage RegulatorsPower EngineeringHardware EngineeringPower Analysis+2

Team motorsports iit roorkee

Member

Sep 2015 – Jan 2016 · 4 mos · IIT Roorkee

It is the group of Inter Disciplinary Engineering students from IIT Roorkee, competing in the International Collegiate Competition. Here we design, fabricate ,analyse, test and run a formula style race car.
As a member of Electrical Team, I work on various problem statements regarding safety circuits , motor control and battery management.

Electronic Engineering