May 2022 – Feb 2023 · 9 mos · Lephalale, Limpopo, South Africa

• I am an experienced construction project supervisor, with a strong focus on delivering projects that meet safety, time, cost, and quality standards as per contractual agreements. I have extensive experience managing and supervising all aspects of construction project life cycles, ensuring adherence to quality assurance and control measures, and overseeing human resource requirements.
• Key responsibilities include planning and coordinating contractor activities during and post-outages, ensuring the timely completion of outstanding scope and defect closures. I have represented Eskom Group Capital Division in various technical discussions, including Medupi Power Station’s new build performance (PJFF, Mills, Gas Air Heater, Pressure Parts, Boiler, and Turbine scope). I regularly participate in outage preparedness and progress reporting, ensuring alignment with contractor schedules and performance benchmarks.
• I maintain detailed records and reports, acting as the Departmental Records Administrator, and oversee the maintenance of completion trackers. I provide input on contractor correspondence, assisting Eskom in evaluating plant and contractor performance, and plant failures.
• Additionally, I supervise site walkdowns, inspections, and contractor performance while ensuring compliance with Eskom’s safety, health, environment, risk, and quality (SHERQ) standards for both internal teams and external contractors. I am committed to delivering high-quality outcomes while ensuring the highest safety standards on all projects.

Mar 2022 – Apr 2022 · 1 mo · Phalaborwa, Limpopo, South Africa · On-site

• am currently involved in the South Pit Fire Protection Project at Foskor Mine, Phalaborwa, which focuses on upgrading existing fire protection installations to meet the stringent requirements of Foskor Insurance, DMR, and SANS standards. This project covers a wide range of critical installations, including fire water tanks, pumps, deluge systems, foam systems, and HDPE works, ensuring all components are designed, manufactured, fabricated, and commissioned to the highest standards.
• Key responsibilities include overseeing civil, structural, mechanical, and piping installations for fire water circuits. This involves excavation, laying HDPE pipes, and installing pumps, tanks, valves, and detection systems. I ensure the project meets all quality assurance requirements, providing a comprehensive quality management system (QMS) and plan in compliance with Foskor's approved standards.
• My role also entails managing all quality control measures, from performance reports to quantity surveying, and ensuring the proper documentation and filing of all quality records. This includes everything from test results and certification to inspection requests and "As Built" drawings, ensuring full compliance with the project scope and standards.
• Additionally, I work closely with contractors to ensure adherence to the approved quality plan and method statements, including identifying and managing non-negotiable quality hold points. This structured approach guarantees that all tasks are completed efficiently, safely, and in line with the project's quality objectives, ensuring successful commissioning and handover to Foskor’s project team.

Nov 2021 – Jan 2022 · 2 mos · South Africa · On-site

• I have extensive experience in quality management, construction management and supervision during outages, overseeing service providers such as Steinmuller, Auma, Kulkoni, and Decra. My responsibilities included developing inspection and test plans, ensuring that method statements were approved by all relevant parties, and maintaining quality assurance (QA) and quality control (QC) registers throughout ongoing production work.
• I conducted inspections on boiler valves, recorded and addressed non-conformities, and performed root cause investigations to implement corrective actions and prevent reoccurrences, following ISO9001:2015 standards. I also led the lap and blue process, torque, and stroke tests on both motorized and manual valves, ensuring they met client acceptance criteria.
• Additionally, I compiled comprehensive data books, coordinated inspections with stakeholders, and managed final inspections and safety clearances in compliance with plant safety regulations. My expertise extends to non-destructive testing (NDT) coordination and interpretation of radiographic films, weld repair coordination, and witnessing NDTs such as MPI, PT, UT, PMI, and drone inspections.
• I played a key role in monitoring service providers’ QMS performance, handling document control as per ISO9001:2015 standards, and updating red-line drawings to reflect as-built conditions. I also ensured timely delivery and inspection of spares, verifying that materials met design and drawing requirements, and overseeing resource management and equipment calibration.
• Working closely with the appointed GMR2.1 and Lead Design Engineer, I ensured statutory and regulatory compliance, maintaining high standards of quality and performance throughout the project lifecycle.

Aug 2021 – Mar 2022 · 7 mos · Lephalale, Limpopo, South Africa

• I served as the Discipline Quality Manager at Eskom Medupi for three years, concluding my tenure on the 13th of August 2021. In this role, I was responsible for overseeing quality management across the mechanical discipline, ensuring compliance with strict industry standards and maintaining excellence throughout the project life cycle.
• Following that, I took on a temporary contract with MHI from 15 November 2021 to 21 January 2022, where I contributed to maintaining quality standards on critical projects.
• I am currently seeking new opportunities where I can apply my expertise in quality management, project supervision, and compliance to drive successful project outcomes and contribute to organizational growth.

Aug 2018 – Aug 2021 · 3 yrs · Medupi · On-site

• In my role as Delegated Discipline Quality Manager at Medupi Power Station, I was entrusted with authority from the FIDIC engineer to represent the employer and ensure project success. When I joined, only three units were commercially operational, and by the end of my tenure, all six units were fully operational. I managed quality control (QA/QC) activities for the main boiler contractor, Mitsubishi Heavy Industries, as well as for over 60 service providers.
• Leading a team of 65 Eskom professionals, including inspectors, certification engineers, and data capturers, I ensured all quality-related processes were followed. My responsibilities included developing inspection plans, overseeing contractor performance, and reviewing data books across the scope of work. I played a key role in dispute resolution cases valued at over R4 billion, saving Eskom more than R1 billion through meticulous investigations and evidence gathering from as-built records.
• I also ensured Eskom’s ISO 9001:2015 certification was maintained, guiding auditors through processes and addressing any findings. My role included mechanical plant safety clearances, ensuring handovers to the hot commissioning team, and verifying contractor compliance with the latest project procedures. I chaired meetings with contractors, managed defect resolution, and conducted audits to ensure compliance with quality standards.
• As a quality leader, I implemented key performance indicators (KPIs) and played a crucial role in plant performance issue resolution. I ensured the project’s quality systems and controls were effective, contributing to the successful completion of Medupi’s power units.

Nov 2016 – Jul 2018 · 1 yr 8 mos · Kusile Power Station · On-site

• During the execution of the Pilot Project at Kusile, I collaborated with the project facilitator to develop an effective inspection procedure that ensured continuous verification of the plant's build programme and documentation. A key contribution was the creation of an inspection registration tracking document, allowing for daily Inspection and Test Notification (I&TN) tracking and ensuring project alignment.
• I was responsible for compiling and delivering weekly and monthly quality reports, along with NDT review status and construction data book updates. I played a key role in the progressive signing of work files/data books, aligning these with the stages of construction to ensure accurate records were maintained. I also contributed to improving the management of foreign material exclusion during construction, ensuring higher quality standards and system handover from construction to commissioning.
• In addition, I facilitated the training of Mitsubishi Hitachi QC inspectors on codes, QA/QC processes, and third-party roles, providing critical ground-level talks with the QA/QC inspectors. I reviewed and analyzed Mitsubishi Hitachi's work procedures, conducted audits on their weld management systems, and provided recommendations for improvement.
• I introduced a handover tracking template for better coordination between disciplines, developed flow charts for control systems leading to client acceptance, and conducted quality control inspections on structural, mechanical, piping, platework, and painting to meet engineering specifications.
• I ensured compliance with equipment calibration requirements and worked closely with the appointed GMR2.1 and Lead Design Engineer to maintain statutory and regulatory compliance. Additionally, I implemented KPIs and KPAs to drive performance and compliance throughout the project.

Jan 2016 – Oct 2016 · 9 mos · Medupi · On-site

• In my role at Medupi Power Station, I was delegated authority and responsibility from the FIDIC engineer to represent the employer. Initially joining as a Senior Inspector, I was promoted to Acting Deputy Discipline Quality Manager after two months due to the end of the DQM contract. My responsibilities spanned all quality assurance and control (QA/QC) activities for the main boiler contractor, Mitsubishi Heavy Industries, and their 60 service providers.
• I managed a team of over 65 skilled professionals, including inspectors, engineers, and data capturers, ensuring the quality of fabrication, construction, and documentation met ISO9001:2015 standards. This included overseeing site inspections, managing inspection reports, and addressing non-conformities through root cause investigations and corrective actions. I also allocated resources effectively, such as quality control inspectors and data book reviewers, to meet contractor needs and project timelines.
• Key responsibilities included compiling and presenting weekly quality reports to the project director, maintaining Eskom’s ISO9001:2015 certification, and playing a pivotal role during audits. I was instrumental in resolving audit findings, developing KPIs and KPAs, and ensuring compliance across all quality processes. Additionally, I facilitated mechanical plant safety clearances and managed handovers to commissioning teams.
• I represented the client in meetings with contractors, ensuring compliance with project-approved procedures, managing defect rectifications, and conducting audits. I frequently interfaced with Eskom’s engineering department to resolve design, installation, and performance issues, as well as contributing to risk and management review meetings.
• Throughout my tenure, I upheld rigorous document control practices, verified equipment calibration, and ensured adherence to statutory and regulatory compliance, contributing to the successful execution and quality management of Medupi’s construction.

Jul 2015 – Jan 2016 · 6 mos · Medupi · On-site

• As a seasoned Quality Control and Assurance professional, I have extensive experience conducting inspections and verifications across structural, mechanical, piping, platework, and painting disciplines, ensuring compliance with engineering and specification requirements on large-scale projects, such as those for Eskom.
• I represented the employer in daily, weekly, and bi-weekly client meetings, overseeing construction, managing data books, resolving QA/QC issues, and addressing non-conformities. My role ensured that the latest project procedures and specifications were followed, working closely with stakeholders.
• I conducted internal audits and ensured compliance with ISO9001:2015 standards, managing defect resolution for both historical and new defects. I also developed flowcharts for control systems to facilitate the final handover to client acceptance.
• My responsibilities included developing inspection and test plans, method statements, and maintaining QA/QC registers. I processed non-conformities, conducted root cause investigations, and implemented client-approved corrective actions.
• I oversaw non-destructive testing (NDT), coordinated weld repairs, and managed final inspections and safety clearances. I ensured equipment calibration compliance and maintained rigorous document control per ISO9001:2015 standards.
• I developed KPAs and KPIs to drive continuous performance improvement, monitored service providers' QMS, conducted surveillance inspections, and managed red-line drawings for as-built conditions.
• Collaborating with the Lead Design Engineer and GMR2.1, I ensured statutory and regulatory compliance, applying the PDCA cycle to enhance process planning, improvement, and performance monitoring across the organization.