Jun 2016 – Dec 2016 · 6 mos

• Support Production line to clean and do verification test for both valve buttons and pump buttons
• Inspect income parts for pilot line.
• Test devices on fixture to verify passed or failed functional.
• Available work with engineering group to develop the sample research.

Jan 2016 – Jun 2016 · 5 mos

• Load electrode and patty into pressure, inspect electrode to the patty bond under microscope, Solder electrode to litz.

Jul 2015 – Dec 2015 · 5 mos

• Responsible for balloons air cleaning, uson test, perform leak test, balloons bonding
• Hot box air bonding, repair all the FEP tube cut, trims, fusing skiving shafts

Nov 2014 – Mar 2015 · 4 mos

• Line clearance verify all the equipment temperature and parts verify all the revision of MPI/SOP for sure use the right MPI open MPI follow step by step to run procedure inspect and reject all the part have to follow PMI
• Responsibilities assembler the catheter beginning to the end, catheter distal shaft necking, inspect the trimming of the bubing, procedures to perform under microscope and magnifying glass usage, work with the small parts and small hand tools, work in environment clean room, Responsibilities for all (SOP) training, and (GMP), (LHR), (MPI), regulations.

Nov 2013 – Aug 2014 · 9 mos · Mountain View

• Responsibilities to lean the glue on the Optic Using tweezers and razor blades to cut and remove the glue, working under microscope, labeling, Alignment. Mechanical Assembler, Entering in data into system, work in clean room, cleanliness, helping run Robert’s Machine operator.

Mar 2013 – Nov 2013 · 8 mos · Alameda, CA

• Responsibilities Follow manufacturing quality instruction (MQI), Good Manufacturing Practices per company operating procedures.
• Built assembly Delivery Catheter, using hot box lamination and tack down junction of the extrusions, uses Horizontal laminator the Catheter tip.
• Used the razor blades to cut work under microscope, quality control and document.
• Cleaned and organized workbenches before and after shift.

Nov 2011 – Apr 2012 · 5 mos · Sunnyvale, CA

• Collected dirty glassware, distributes clean glassware, turn oven on, calibrate pH meter, and unload/load glassware in ethanol bath.
• Balanced base waste pH before dumping, unload/load glass washing machine
• Balanced machine waste pH before dumping and load clean glassware in oven for the day, control and record pH and temperature on Omega PHCN-50.helping packaging in the shipping area.

Jan 2003 – Nov 2008 · 5 yrs 10 mos · South San Francisco, CA

• Cleaned the prepping lab ware and sterilize glassware for biology, chemistry, and pharmacology following specific GMP guidelines.
• Prepared materials and equipment for sterilization, operating the washer, oven and autoclave, assist with glassware wash procedures as needed, prepare solutions and Q-water for all general lab use.
• Responsible for purchasing and ordering supplies for various departments as needed.
• Performed Worm (C. elegant) and bacterial (LB) plate preparation and stock plates as required for scientists.

Jun 1993 – Feb 2001 · 7 yrs 8 mos · Milpitas, CA

• Labeled the board including cleanliness, production line hand load & tool QA assembly.
• Cut quality inventory records, and entering in data into system.